Parts Catalogue

Get access to multiple electrical parts and components in SkyCAD file format, all created and shared by the SkyCAD user community.

By allowing SkyCAD to automatically share electrical parts you create and modify, you will get access to the entire on-line catalogue.

Check out the short video tutorial for more details.

Got a question or issue? Reach the on-line catalogue forum
Part number Manufacturer Class Description
Part image
SE3-SW5U
Stride
Networking
STRIDE industrial unmanaged Ethernet switch, 5 ports, (5) Ethernet 10/100Base-T (RJ45) port(s), -10 to +65 deg C, metal housing, IP30, 35mm DIN rail or panel mount.
Picture: Part image Layout view: Layout view image
SE503905
Steute
Safety switch
Ex safety sensor Ex HS Si 4 2Ö - 10m
Picture:
Part image
SE6104A
Automated Logic
PLC
The Automated Logic® SE controllers are an integral component of the WebCTRL building automation system.
The SE controllers are fully programmable, native BACnet advanced application controllers that provide a rugged solution for single-equipment applications.
Designed to operate in a wide range of environmental conditions, SE controllers can be used inside rooftop units, mechanical rooms, equipment closets, or almost any other weather-tight location.
Picture: Part image Layout view: Layout view image
SEL-2401
SEL
Networking
SATELLITE SYNCHRONIZED CLOCK
Picture: Layout view:
SEL-3350 1U
SEL
PLC
AUTOMATION CONTROLLER
Picture: Layout view:
SEM203P
Status Instruments
Temp. Transmitter
Temperature transmitter
Picture:
SEM206P
Status Instruments
Temp. Transmitter
Temperature transmitter
Picture:
SEM210
Status Instruments
Temp. Transmitter
Temperature transmitter
Picture:
Part image
SEN-30103-K1
Playing With Fusion
Thermocouple & RTD
Analog thermocouple amplifier board based on the AD849x from Analog Devices (successor of the AD597). This quad-channel thermocouple board converts the very low voltage signal from a thermocouple to a highly-linear, 0.005V/°C output with either 0V or 1.245V offset (both configurations stocked) while removing unwanted noise from the signal.

Many supply and output configurations are available with this board, though the PCB was designed with Arduino in mind. Specifically, the output header will plug directly into a standard Arduino Uno or Mega, with a pin-for-pin match for power supply, ground and analog outputs. With a 5V Arduino, temperatures from 0°C to 1,000°C are possible with the 0V offset board and -249°C to 750°C with the 1.245V offset board. If using a 3.3V microcontroller (Due, etc), the board must be supplied with no more than 3.3V to avoid damaging the microcontroller.

Temperature measurement range is dependent on the supply voltage. It is possible to supply the board with higher voltages to allow temperature measurement over the entire operating range of the K-Type and J-Type thermocouples, allowing use with more capable data acquisition equipment.
Picture: Part image
Part image
SEP1-SWP2A5UG-T
Stride
Networking
PoE+ switch,120W, 5 ports, (4) PoE+ Gigabit (RJ45) and (1) Gigabit (RJ45) port, 12-55 VDC
Picture: Part image Layout view: Layout view image
SEP1500
Riello
Power supply
UPS RIELLO SENTINEL PRO SEP1500 1500VA/1350W
Picture: Layout view:
Layout view image
Series 2 KIP D261010 24Vdc
Norgren
Solenoid valve
Series 2 KIP D261010 24Vdc
Layout view: Layout view image
Layout view image
SGA-D
SGA
Loadcell
24V DC IN 0-10VDC OUT
Layout view: Layout view image
Part image
SGD7S-120AM0A000F50
Yaskawa
Drive
SGD7S Sigma-7Siec 200v 1.5kw
Picture: Part image Layout view: Layout view image
Part image
SGDXS-1R6A40A
Yaskawa
Drive
Σ-XS SERVOPACK 0.2kW/200VAC/MECHATROLINK-4/III
Picture: Part image Layout view: Layout view image
Part image
SH4-14-0600-B-5-RX
Datasensing
Sensor
Safety Light Curtain Receiver 14mm 600mm Type4/PLe/SIL
Picture: Part image
Part image
SHL-Q55
Omron
Limit switch
Omron SHL Series Plunger Limit Switch, NO/NC, IP67, SPDT, 480V ac Max, ac 2 A, dc 200mA Max
Picture: Part image
Part image
SI-MAGB1SMQD
Banner
RFID Sensor
RFID Safety Switch. M8 4-pin connector. Needs magnet accessory. IP67
Picture: Part image
SI12-A2 NO H
AECO
Sensor
Inductive Prox Sensor
Picture:
SIC.AHM36B-BDQC012x12
SICK
Encoder
IO Link Absolute Multi-Turn Encoder Overview
Picture:
SIC.DFS60B-S4PC10000
SICK
Encoder
Programmable Incremental encoders. Part number: 1036721
Picture:
SIC.DOL-1208-G05MAC1
SICK
Cable
Female connector, M12, 8-pin, straight. 5m Flying Lead. Shielded. Part number: 6032867
Picture:
SIC.DOL-1208-G10MAC1
SICK
Cable
Female connector, M12, 8-pin, straight. 10m Flying Lead. Shielded. Part number: 6032867
Picture:
SIC.DT35-B15251
SICK
Photocell
IO Link distance Sensor
Picture:
SIC.GL10-P4212
SICK
Photocell
GL10 Retroreflective PE. Retangular housing. 10m Max. Adjustable light/dark switching
Picture: